esptool.py
Verified for current stable LTS
Esptool.py Command: Erase Flash
Use for erase flash with Esptool.py. Exact CLI syntax to erase flash using Esptool.py.
When to use this: Use for erase flash with Esptool.py.
Command Syntax
sudo esptool.py --port <port> --baud <baud_rate> erase_flashsudo esptool.py --port <port> --baud <baud_rate> erase_flashCommand Breakdown
--port- Command Option
- Tool-specific option used by this command invocation.
--baud- Command Option
- Tool-specific option used by this command invocation.
FAQ
Purpose: Exact syntax to erase flash using Esptool.py.
Test path: Replace placeholders and run destructive commands in a disposable workspace first.
Flag behavior: Tool version, platform, and shell can change behavior.
Improve This Command
Suggest a correction, safer default, or version-specific note for this entry.
Related Operations
Esptool.py Command: Flash Firmware
sudo esptool.py --port <port> --baud <baud_rate> write_flash 0x0 <path/to/firmware.bin> Arduino Command: Build And Upload Sketch To Nano arduino --board {arduino:avr:nano:cpu=atmega328p} --port </dev/ttyACM0> --upload <path/to/file.ino> Calibre Server Command: Start Server Different Port calibre-server --port <port> Arduino Command: Build And Upload Nano Sketch arduino --board {arduino:avr:nano:cpu=atmega328p} --port </dev/ttyACM0> --upload <path/to/file.ino> Chisel Command: Run Chisel Server On Specific Port chisel server -p <server_port>